Processing Plant
Dover, OH
Today, with over 800,000 square feet of space and on-going investments in equipment, the Dover facility boasts some of the most advanced production available. That equipment combines with the skill of people who know the difference between good steel and world-class steel. The end result is cold rolled strip that takes a back seat to no one.
Grades | 1001, 1002, 1004, 1005, 1006, 1008, 1010, 1018, 1019, 1020 and 1524 |
Thickness | .015″ to .187″ (lighter or heavier upon inquiry) |
Widths | 1/2″ to 26″ (narrower or wider upon inquiry) |
Finishes | LaserMatte®, #1 matte (20 min – 60 max Ra), #2 (20 max Ra), #2R (12 min–20 max Ra) Lite Bright (10 max Ra), #2B best bright (5 max Ra), #3 appliance finish (2 max Ra) (various brush and pattern finishes available upon inquiry) |
Edges | 1, 2, 3, 4, 5, 6 (other edge contours upon inquiry) |
Tempers | #1 full hard, #2, #3, #4, #5 dead soft |
Grades | C-1035 through C-1095, 4130, 4140 and 6150, NS-801 (other alloys upon inquiry)AISI/SAE HSLA grades 45 through 80, HSLA grades GS80-GS150 |
Thickness | .020″ to .187″ (lighter or heavier upon inquiry) |
Widths | 1/2″ to 26″ (narrower or wider upon inquiry) |
Finishes | #1 matte (30 max Ra), #2 (20 max Ra), #2R (12 min–20 max Ra) #2B best bright (5 max Ra), (brush finishes available upon inquiry) |
Edges | 2, 3, 4, 5, 6 (for grades 1070 and higher, the edge is not fully healed) |
Tempers | Hard rolled, intermediate tempers, spheroidized annealed |
Grades | 1008/1010, 1035, 1045, 1055 (other grades upon inquiry) |
Thickness | .025″ to .187″ (lighter or heavier upon inquiry) |
Widths | .0225″ to .625″ (narrower or wider upon inquiry) |
Finishes | #1 matte (30 max Ra), #2 (20 max Ra) |
Edges | 1rd, 1sq, 3, 4, 5, 6 |
Tempers | #1 full hard, #2, #3, #4, #5 dead soft |
Thickness | Shear Strength | Tensile Strength |
---|---|---|
.025- .188 | 120k psi | 140k psi |
.189- .200 | 105k psi | 140k psi |
.201- .220 | 90k psi | 120kpsi |
Coil width | 30″ max.; 6″ min; 1″ min w/special handling |
Coil OD | 72″ max; 28″ min |
Coil ID | 16-20″ |
Feed length | 12″ min; 160′ max |
Repetitive length | +/- .125″; +/-.015” with special handling |